1 in stock
RFJ280J
Raystar RFJ280J:
DATASHEET
Read more
| Size | 2.8 | inch |
| Dot Matrix (Resolution) | 240 × RGB × 320 (TFT) | dots |
| Module Dimension | 50.5(W) × 69.7(H) × 4.55(D) | mm |
| View Area | 44.2 × 58.6 | mm |
| Active Area | 43.2 × 57.6 | mm |
| Dot Pitch | 0.18 × 0.18 | mm |
| LCD Type | TFT, Normally Black, Transmissive | |
| Viewing Angle | 80/80/80/80 (IPS) | |
| Aspect Ratio | 3:4 | |
| Backlight Type | LED, Normally White | |
| Control-Board | No | |
| Built-in Controller | No | |
| TFT Driver IC | ILI9341V or equivalent | |
| Interface | MCU/SPI | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
| Brightness | 1000 | cd/㎡ |
| Frame Through Hole | No | |
| Operating Temperature | -20~+70 | °C |
| Storage Temperature | -30~+80 | °C |
| TFT Series | High Brightness TFT LCD, IPS TFT LCD |
DATASHEET
1 in stock
RL0F00050000FGAAASA00
RL0F00050000FGAAASA00:
Read more
- DC 5V working voltage, low power consumption for USB to drive.
- Power-On Self-Test & Splash screen.
- CAN bus Interface.
- Supports CANopen protocol, default baud rate at 250KB.
- Built in flash memory, store the font and Object Dictionary Data.
- Supports PCAP touch screen.
- CanTFT Smart Display is defined as a slave device, which is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects.
- Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
- Built-in Buzzer is controlled from master device