ESP-WROOM-02U
ESP-WROOM-02U
DATASHEET
Read more
- Peripheral interface – UART/HSPI/I2C/I2S/IR Remote Control,GPIO/PWM
- Operating voltage 3.0 V ~ 3.6 V
- Operating current Average: 80 mA
- Operating temperature range -40°C ~ 85°C
- Storage temperature -40°C ~ 85°C
- Package size 18±0.1 mm x 14.3±0.1 mm x 3.2±0.1 mm
- External interface – Wi-Fi mode Station/SoftAP/SoftAP + Station
- U.FL External Antenna
DATASHEET
ESP-WROOM-32U
ESP-WROOM-32U
DATASHEET
Read more
- Module interface: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, I2C, IR,GPIO, capacitive touch sensor, ADC, DAC, LNA pre-amplier
- On-chip sensor Hall sensor, temperature sensor
- On-board clock 26 MHz crystal, 32 kHz crystal
- Operating voltage 2.2 ~ 3.6V
- Operating current Average: 80 mA
- Operating temperature range -40°C ~ 85°C *
- Ambient temperature range Normal temperature
- Package size 18±0.1 mm x 19±0.1 mm x 3.2±0.1 mm
- U.FL Connector for External Antenna
DATASHEET
1 in stock
ESP-WROOM-S2
ESP-WROOM-S2:
DATASHEET
Read more
- High-performance 160 MHz single-core CPU
- +19.5 dBm output at the antenna ensures a good physical range
- Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
- Fully certified with integrated antenna and software stacks
DATASHEET
1 in stock
ESP32-Azure
ESP32-Azure:
DATASHEET
Read more
- ESP32-WROVER-B module
- Serial port-to-USB bridge
- Lithium battery
- Charge management IC
- 0.96" OLED display
- MicroSD card slot
- Buzzer
- Multiple sensors
- Touch buttons
- LEDs and other hardware resources
DATASHEET
1 in stock
ESP32-C3-WROOM-1
ESP32-C3-WROOM-1:
Read more
- A complete Wi-Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
- A Bluetooth LE subsystem that supports features of Bluetooth 5 and Bluetooth mesh
- State-of-the-art power and RF performance 32-bit RISC-V single-core processor with a four-stage pipeline that operates at up to 160 MHz
- 400 KB of SRAM (16 KB for cache) and 384 KB of ROM on the chip, and SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to external flash
- 22 × programmable GPIOs
- 2 × 12-bit SAR ADCs, up to 6 channels
- 1 × temperature sensor
- 3 × SPI
- 2 × UART
- 1 × I2C
- 1 × I2S
- Remote control peripheral, with 2 transmit channels and 2 receive channels
- LED PWM controller, up to 6 channels General DMA controller, with 3 transmit channels and 3 receive channels
- 1 × TWAITM controller (compatible with ISO 11898-1)
Out of stock
ESP32-CAM
ESP32-CAM:
The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 27*40.5*4.5mm and a deep sleep current of up to 6mA.
ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications.
DATASHEET
Read more
- The smallest 802.11b/g/n Wi-Fi BT SoC Module
- Low power 32-bit CPU,can also serve the application processor
- Up to 160MHz clock speed，Summary computing power up to 600 DMIPS
- Built-in 520 KB SRAM, external 4MPSRAM
- Supports UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras,Built-in Flash lamp.
- Support image WiFI upload
- Support TF card
- Supports multiple sleep modes.
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP operation mode
- Support Smart Config/AirKiss technology
- Support for serial port local and remote firmware upgrades (FOTA)
DATASHEET
1 in stock
ESP32-EYE
ESP32-EYE:
Read more
- WiSoC- ESP32 dual core Tensilica LX6 processor with WiFi and Bluetooth
- Memory – 8MB PSRAM
- Storage – 4MB flash
- Camera – 2MP OV2640 camera
- Audio – Microphone
- USB – 1x micro USB port for power and programming
- Misc – Reset, boot and function buttons, 2x LEDs
- Dimensions – 41 x 21 mm
1 in stock
ESP32-S2-WROOM
ESP32-S2-WROOM:
DATASHEET
Read more
- Based on new ESP32-S2 Chipset
- High-performance 160 MHz single-core CPU
- +19.5 dBm output at the antenna ensures a good physical range
- Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
- Fully certified with integrated antenna and software stacks
DATASHEET