1 in stock
ESP Rainmaker
ESP Rainmaker:
ESP RainMaker is an end-to-end platform that enables Makers to realize their IoT ideas faster with Espressif’s ESP32-S2 SoC without hassle of managing any infrastructure. It provides a device SDK, self-adapting phone apps, transparent cloud service and host utilities to reduce complexity in development.
Read more
1 in stock
ESP32-C3
ESP32-C3:
Read more
- A complete Wi-Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
- A Bluetooth LE subsystem that supports features of Bluetooth 5 and Bluetooth mesh
- State-of-the-art power and RF performance 32-bit RISC-V single-core processor with a four-stage pipeline that operates at up to 160 MHz
- 400 KB of SRAM (16 KB for cache) and 384 KB of ROM on the chip, and SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to external flash
- 22 × programmable GPIOs
- 2 × 12-bit SAR ADCs, up to 6 channels
- 1 × temperature sensor
- 3 × SPI
- 2 × UART
- 1 × I2C
- 1 × I2S
- Remote control peripheral, with 2 transmit channels and 2 receive channels
- LED PWM controller, up to 6 channels General DMA controller, with 3 transmit channels and 3 receive channels
- 1 × TWAITM controller (compatible with ISO 11898-1)
1 in stock
ESP32-D0WD-V3
ESP32-DoWD-D3:
Datasheet
Read more
- Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
Datasheet
1 in stock
ESP32-D0WDQ6
ESP32-D0WDQ6
DATASHEET
Read more
- Dual CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET
ESP32-PICO-D4
ESP32-PICO-D4
DATASHEET
Read more
- The Espressif ESP32-PICO-D4 is a System-in-Package (SIP) module that is based on ESP32, providing complete Wi-Fiand Bluetooth functionalities
- Module has a size as small as 7.0±0.1 mm×7.0±0.1 mm×0.94±0.1 mm
- ESP32-PICO-D4 integrates all peripheral components seamlessly, including a crystal oscillator, flash, filter capacitors and RF matching links in one single package.
- On-Chip Sensors: Hall Sensor and Temperature Sensor
- Module Interface: ADC, LNA pre-amplifier, DAC, touch sensor, SD/SDIO/MMC,Host Controller, SPI, SDIO/SPI Slave Controller, EMAC, motor,PWM, LED PWM, UART, I2C, I2S, infrared remote controller,GPIO.
- Operating Current: 80mA
- Operating Voltage: 2.3 to 3.6 V
DATASHEET
1 in stock
ESP32-S0WD
ESP32-S0WD
DATASHEET
Read more
- BLuetooth 5
- Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET
1 in stock
ESP32-S2
ESP32-S2:
Read more
- Xtensa® single-core 32-bit LX7 microcontroller
- 7-stage pipeline
- Clock frequency up to 240 MHz
- Ultra-low-power co-processor
- 320 kB SRAM, 128 kB ROM, 16 KB RTC memory
- External SPIRAM (128 MB total) support
- Up to 1 GB of external flash support
- Separate instruction and data cache
- Wi-Fi 802.11 b/g/n
- 1x1 transmit and receive
- HT40 support with data rate up to 150 Mbps
- Support for TCP/IP networking, ESP-MESH networking, TLS 1.0, 1.1 and 1.2 and other networking protocols over Wi-Fi
- Support Time-of-Flight (TOF) measurements with normal Wi-Fi packets
- 43 programmable GPIO’s
- 14 capacitive touch sensing IO’s
- Standard peripherals including SPI, I2C, I2S, UART, ADC/DAC and PWM
- LCD (8-bit parallel RGB/8080/6800) interface and also support for 16/24-bit parallel
- Camera interface supports 8 or 16-bit DVP image sensor, with clock frequency of up to 40 MHz
- Full speed USB OTG support
1 in stock
ESP8266EX
ESP8266EX
DATASHEET
Read more
- High-performance 160 MHz single-core CPU
- +19.5 dBm output power ensures a good physical range
- Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
DATASHEET
1 in stock
ESP8285
ESP8285
DATASHEET
Read more
- High-performance 160 MHz single-core CPU
- +19.5 dBm output power ensures a good physical range
- Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
DATASHEET
1 in stock
ESP8684
ESP8684:
Read more
- A complete WiFi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
- A Bluetooth LE subsystem that supports features of Bluetooth 5, multiple connections and advertising extensions.
- State of theart power and RF performance
- 32bit RISCV singlecore processor with a four-stage pipeline that operates at up to 120 MHz
- Storage capacity ensured by 272 KB of SRAM (16 KB for cache) and 576 KB of ROM on the chip
- Rich set of peripheral interfaces and GPIOs, ideal for various scenarios and complex applications