Return to previous page
Filters
Grid
List
Show

1 in stock

Arduino GPRS/GPS Tracker Shield

SIXFAB
Arduino GPRS/GPS Tracker Shield:
  1. Embedded GSM/GPRS and GNSS antennas, can be connect external antennas optionally
  2. Advanced power and sleep controls for battery and solar powered applications
  3. Industry’s highest level of GNSS sensitivity, accuracy and TTFF(Time to First Fix) with the lowest power consumption
  4. TTFF (Time to First Fix) ,Cold Start: <15s average, Warm Start: <5s average
  5. L96 GNSS module supports multiple positioning and navigation systems including GPS, GLONASS, Galileo, BeiDou, SBAS (including WAAS, EGNOS, MSAS and GAGAN), QZSS, DGPS, and AGPS.
  6. M95  Quad-band GPRS module supports GSM850MHz, EGSM900MHz, DCS1800MHz and PCS1900MHz
  7. L96 module features embedded logger function provides a position log capacity of more than 16 hours
  8. Easy sense 3D FIX, Geo-Fence, 1PSS status via GNSS output pin connected to Arduino
  9. CR1220 GPS/GNSS Back-up Battery holder at the bottom side of the board
  10. External Active GNSS Antenna Connector (Solder Required)
  11. Less than 100 nanoAmps consumption when the power of Shield is disabled via Disable Pin
  12. Micro SIM Card supported
  13. GNSS Module Control Pins: 1PPS, 3D Fix, Force On, Geo-Fence, Reset
  14. GPRS Module Control Pins: Status, PowerKey
  15. LEDs: 1PPS, 3D FIX, Power, Status, Netlight
  16. Buttons: Powerkey, User
 
Read more

1 in stock

LoRa Raspberry Pi Cellular Gateway Development Kit

SIXFAB

LoRa Raspberry Pi Cellular Gateway Development Kit

  1. Fully assembled LoRa Gateway Kit for Raspberry Pi
  2. Sixfab LoRa Gateway HAT based on RAK833 LoRa Module
    1. SX1301 provides 8 uplink and 1 downlink LoRa demodulation paths
    2. Max Tx Power of 20dBm
    3. RX sensitivity of -136dBm
    4. Full LoRaWAN 1.0.2 stack support
    5. Compatible with 868 MHz (Europe) and 915 MHz (North America) ISM Bands
    6. Both SPI and USB interfaces are supported and selectable
  3. 4G/LTE Base Shield with Quectel EC25 CAT4 LTE Module
    1. 150 Mbps DL / 50 Mbps UL
    2. Embedded GNSS
    3. Europe and North America regions available
  4. Raspberry Pi 3 Model B+ with The Things Network Ready pre-programmed SD Card
  5. Customized Official Raspberry Pi Power Supply for outdoor using
  6. High-gain antennas
  7. IP65 Aluminum Enclosure: 148mm x 108mm x 75mm w/ waterproof&dustproof sockets
  8. Can be mount directly on pole or wall
  9. Working temperature range: -25°C ~ 65°C
 
Read more

1 in stock

MIKROE-4328 – USB-C Sink Click

MIKROE
MIKROE-4328:
  • Type: USB-C PD
  • Applications: Can be used for various applications like autonomous systems that requires high power charging profile to be fully operational.
  • On Board Modules: USB-C Sink Click is based on the STUSB4500, a USB-C sink-only controller compatible with Power-Delivery (PD) from STMicroelectronics.
  • Key features: Auto-run Type-C and USB PD sink controller, dual high power charging path support, integrated VBUS voltage monitoring, debug accessory mode support, and more.
  • Interface: I2C
  • Compatibility: mikroBUS
  • Click Board Size: M (42.9 x 25.4 mm)
  • Input Voltage: 3.3V or 5V
 
Read more

1 in stock

MIKROE-4329 – USB-C Source Click

MIKROE
MIKROE-4329:
  • Type: USB-C PD
  • Applications: Can be used for any type-C source device, AC adapters, and power supplies for computer, consumer or portable consumer applications, and more.
  • On-Board Modules: USB-C Source Click is based on the STUSB4700, a standalone autonomous USB power delivery controller optimized as a provider to negotiate a given amount of power to be sourced to an inquiring consumer device from STMicroelectronics.
  • Key Features: Low power consumption, high-voltage capability, support full USB PD negotiation for Source applications, built-in over-voltage protection, and more.
  • Interface: I2C
  • Compatibility: mikroBUS
  • Click Board Size: L (57.15 x 25.4 mm)
  • Input Voltage: 3.3V or 5V
 
Read more

1 in stock

MIKROE-4354 – BUCK & BOOST CLICK

MIKROE
MIKROE-4354:
  • Type: Buck-Boost
  • Applications: Can be used for Portable and Infotainment Applications
  • On-Board Modules: Buck & Boost Click is based on the MIC7401, a powerful highly-integrated configurable power management (PMIC) featuring buck and boost regulators and a high-speed I2C interface with an internal EEPROM memory and micro-power shutdown function from Microchip.
  • Key Features: High-density five buck channels, one independent boost channel, 93% peak efficiency, fast transient response, short-to-ground fault detection, and more.
  • Interface: I2C
  • Compatibility: mikroBUS
  • Click Board Size: L (57.15 x 25.4 mm)
  • Input Voltage: 5V,External
 
Read more

1 in stock

MS01 – Soil Sensor

SONOFF
MS01:
  • Humidity Measuring: 0-100% RH
  • Operating Temp. Range: 0 – 60℃
  • Waterproof Level: IP55
  • Maximum Extended Length: 10m
  • Size: 130x30x13mm
  • Cable Length: 50cm
  • Humidity Sensor Type: Capacitive
  • Power Supply: 3.3V
  • Flame Retardant Rating: V0
 
Read more

1 in stock

RAK5010

RAK Wireless

RAK5010

  • Quectel BG96, with LTE CAT M1, LTE NB1, and GNSS
  • Nordic nRF52840, with BLE5.0 and long-range BLE.
  • nRF52840 integrates an ultra-low-power ARM Cortex-M4 (64Mhz) microcontroller
  • Built-in humidity and temperature sensor, pressure sensor, 3-axis motion sensor, and ambient light sensor.
  • iPEX connectors for the LTE and GPS antenna and an on-board ceramic antenna for the BLE.
  • nano-SIM and ESIM options.
  • Can be powered by either Micro USB, 3.7V rechargeable battery or a 5V Solar Panel Port
  • Multiple interfaces, I2C, UART, GPIO, ADC
 
Read more

1 in stock

RAK815

RAK Wireless

RAK815

  • Semtech SX1276 LoRaWAN™ Version V1.0.2
  • NRF52832 Bluetooth Version 5.0
  • U-Blox GPS
  • Support for both ABP and OTAA activation
  • Dedicated battery connector
  • Micro USB interface for charging and configuration
  • Operation temperature: -20ºC ~ 60ºC
 
Read more

1 in stock

RAK8211-NB

RAK Wireless
RAK8211-NB
  • Quectel BC95 Nb-IoT Module
  • Quectel L70 GPS module
  • Bands: B5/B8/B20/B28
  • Bluetooth 5.0 (BLE)
  • Accelerometer, Ambient Light Sensor, Humidity/Temperature/Pressure Sensor
DATASHEET
Read more

1 in stock

Raspberry Pi 3G/4G<E Base HAT

SIXFAB

Raspberry Pi 3G/4G&LTE Base HAT:

  1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  2. Easy-to-use, simple setup, plug-and-play
  3. QMI and PPP are supported
  4. Clip-in Mini PCIe socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
  5. With the 4G/LTE Module(e.g Quectel EC25) you can reach 150Mbps downlink and 50Mbps uplink data rates. And the 3G Module( e.g Quectel UC20) delivers the maximum data rate of 14.4Mbps downlink and 5.76Mbps uplink.
  6. Micro SIM Card socket can easily reachable on the upside of the HAT.
  7. Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi.
  8. The HAT can be powered from an external 5V source by exposed power pins, directly from Raspberry Pi 5V GPIO headers, via micro USB, or optional JST connector on the bottom of the board. A specially designed 90-degree right angle micro USB cable is included to package.
  9. Efficient and low quiescent current power circuit can hold up to 3Amps
  10. Optional Send/Receive AT commands over Raspberry Pi UART port is available
  11. Taking the module into the Airplane Mode, resetting module or RI and DTR functions can be accessible over GPIO pins.
  12. The power of the whole board electronics can be disabled for low-power consumption use cases
  13. The modules(EC25&UC20) have built-in GNSS(GPS/GLONASS) receiver for your location-based applications.
  14. Working temperature range: -40°C ~ 80°C
 
Read more

1 in stock

Raspberry Pi Cellular IoT Application Shield – LTE-M & NB-IoT & eGPRS

SIXFAB

Raspberry Pi Cellular IoT Application Shield – LTE-M & NB-IoT & eGPRS

  1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  2. Supported Protocols: PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT
  3. Worldwide coverage with supported bands:
    • Cat M1/Cat NB1:
      • LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
      • LTE TDD: B39 (For Cat M1 Only)
    • EGPRS: 850/900/1800/1900MHz
  4. Embedded GNSS Functionality (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS)
  5. 12-Bit 4 Channel ADC
  6. 3-axis Accelerometer
  7. Humidity and Temperature Sensors
  8. Ambient Light Sensor
  9. Isolated Optocoupler Inputs
  10. 1-Wire Sensors Interface
  11. 3GPP E-UTRA Release 13, 3GPP TS27.007, 3GPP TS 27.005 and Quectel Enhanced AT Commands over UART port to Raspberry Pi is available
  12. Efficient and low quiescent current regulator circuit can hold up to 3.6A
  13. Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi
  14. Micro SIM Card socket can easily reachable on the upside of the shield.
  15. Working temperature range: -30°C to +80°C
 
Read more

1 in stock

Raspberry Pi Cellular IoT HAT – LTE-M & NB-IoT & eGPRS

SIXFAB

Raspberry Pi Cellular IoT HAT – LTE-M & NB-IoT & eGPRS

  1. Quectel BG96 LTE Cat M1 & Cat NB1 & EGPRS Module
  2. Worldwide coverage
  3. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  4. Slots on board for Raspberry Pi display and camera cables
  5. Supported Protocols: PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT
  6. Embedded GNSS (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS) with selectable active/passive antenna circuitry
  7. SMS Mode: Point-to-point MO and MT, SMS Cell Broadcast, Text and PDU Mode
  8. Communicate over UART or USB with AT commands and PPP connection
 
Read more
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.