Return to previous page

We provide connectivity hardware&software for the Internet of Things ideas. Sixfab started with Tinylab, an all-in-one IoT prototyping board in 2016. Then our cellular IoT shields for mighty Raspberry Pi crowdfunded by 2017. The number of technologies added to our shield family increases day by day. Also, we serve as a team member of your IoT projects, designs products and crafts necessary software for you(share your need at hello[at]sixfab.com).

Now, we have been focusing on creating a modular hardware ecosystem with its cloud platform, accessories, and enclosures that let you turn your ideas to products in days. More caffeine, please…

Filters
Grid
List
Show

1 in stock

Arduino GPRS/GPS Tracker Shield

SIXFAB
Arduino GPRS/GPS Tracker Shield:
  1. Embedded GSM/GPRS and GNSS antennas, can be connect external antennas optionally
  2. Advanced power and sleep controls for battery and solar powered applications
  3. Industry’s highest level of GNSS sensitivity, accuracy and TTFF(Time to First Fix) with the lowest power consumption
  4. TTFF (Time to First Fix) ,Cold Start: <15s average, Warm Start: <5s average
  5. L96 GNSS module supports multiple positioning and navigation systems including GPS, GLONASS, Galileo, BeiDou, SBAS (including WAAS, EGNOS, MSAS and GAGAN), QZSS, DGPS, and AGPS.
  6. M95  Quad-band GPRS module supports GSM850MHz, EGSM900MHz, DCS1800MHz and PCS1900MHz
  7. L96 module features embedded logger function provides a position log capacity of more than 16 hours
  8. Easy sense 3D FIX, Geo-Fence, 1PSS status via GNSS output pin connected to Arduino
  9. CR1220 GPS/GNSS Back-up Battery holder at the bottom side of the board
  10. External Active GNSS Antenna Connector (Solder Required)
  11. Less than 100 nanoAmps consumption when the power of Shield is disabled via Disable Pin
  12. Micro SIM Card supported
  13. GNSS Module Control Pins: 1PPS, 3D Fix, Force On, Geo-Fence, Reset
  14. GPRS Module Control Pins: Status, PowerKey
  15. LEDs: 1PPS, 3D FIX, Power, Status, Netlight
  16. Buttons: Powerkey, User
 
Read more

1 in stock

LoRa Raspberry Pi Cellular Gateway Development Kit

SIXFAB

LoRa Raspberry Pi Cellular Gateway Development Kit

  1. Fully assembled LoRa Gateway Kit for Raspberry Pi
  2. Sixfab LoRa Gateway HAT based on RAK833 LoRa Module
    1. SX1301 provides 8 uplink and 1 downlink LoRa demodulation paths
    2. Max Tx Power of 20dBm
    3. RX sensitivity of -136dBm
    4. Full LoRaWAN 1.0.2 stack support
    5. Compatible with 868 MHz (Europe) and 915 MHz (North America) ISM Bands
    6. Both SPI and USB interfaces are supported and selectable
  3. 4G/LTE Base Shield with Quectel EC25 CAT4 LTE Module
    1. 150 Mbps DL / 50 Mbps UL
    2. Embedded GNSS
    3. Europe and North America regions available
  4. Raspberry Pi 3 Model B+ with The Things Network Ready pre-programmed SD Card
  5. Customized Official Raspberry Pi Power Supply for outdoor using
  6. High-gain antennas
  7. IP65 Aluminum Enclosure: 148mm x 108mm x 75mm w/ waterproof&dustproof sockets
  8. Can be mount directly on pole or wall
  9. Working temperature range: -25°C ~ 65°C
 
Read more

1 in stock

Raspberry Pi 3G/4G<E Base HAT

SIXFAB

Raspberry Pi 3G/4G&LTE Base HAT:

  1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  2. Easy-to-use, simple setup, plug-and-play
  3. QMI and PPP are supported
  4. Clip-in Mini PCIe socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
  5. With the 4G/LTE Module(e.g Quectel EC25) you can reach 150Mbps downlink and 50Mbps uplink data rates. And the 3G Module( e.g Quectel UC20) delivers the maximum data rate of 14.4Mbps downlink and 5.76Mbps uplink.
  6. Micro SIM Card socket can easily reachable on the upside of the HAT.
  7. Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi.
  8. The HAT can be powered from an external 5V source by exposed power pins, directly from Raspberry Pi 5V GPIO headers, via micro USB, or optional JST connector on the bottom of the board. A specially designed 90-degree right angle micro USB cable is included to package.
  9. Efficient and low quiescent current power circuit can hold up to 3Amps
  10. Optional Send/Receive AT commands over Raspberry Pi UART port is available
  11. Taking the module into the Airplane Mode, resetting module or RI and DTR functions can be accessible over GPIO pins.
  12. The power of the whole board electronics can be disabled for low-power consumption use cases
  13. The modules(EC25&UC20) have built-in GNSS(GPS/GLONASS) receiver for your location-based applications.
  14. Working temperature range: -40°C ~ 80°C
 
Read more

1 in stock

Raspberry Pi Cellular IoT Application Shield – LTE-M & NB-IoT & eGPRS

SIXFAB

Raspberry Pi Cellular IoT Application Shield – LTE-M & NB-IoT & eGPRS

  1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  2. Supported Protocols: PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT
  3. Worldwide coverage with supported bands:
    • Cat M1/Cat NB1:
      • LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
      • LTE TDD: B39 (For Cat M1 Only)
    • EGPRS: 850/900/1800/1900MHz
  4. Embedded GNSS Functionality (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS)
  5. 12-Bit 4 Channel ADC
  6. 3-axis Accelerometer
  7. Humidity and Temperature Sensors
  8. Ambient Light Sensor
  9. Isolated Optocoupler Inputs
  10. 1-Wire Sensors Interface
  11. 3GPP E-UTRA Release 13, 3GPP TS27.007, 3GPP TS 27.005 and Quectel Enhanced AT Commands over UART port to Raspberry Pi is available
  12. Efficient and low quiescent current regulator circuit can hold up to 3.6A
  13. Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi
  14. Micro SIM Card socket can easily reachable on the upside of the shield.
  15. Working temperature range: -30°C to +80°C
 
Read more

1 in stock

Raspberry Pi Cellular IoT HAT – LTE-M & NB-IoT & eGPRS

SIXFAB

Raspberry Pi Cellular IoT HAT – LTE-M & NB-IoT & eGPRS

  1. Quectel BG96 LTE Cat M1 & Cat NB1 & EGPRS Module
  2. Worldwide coverage
  3. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
  4. Slots on board for Raspberry Pi display and camera cables
  5. Supported Protocols: PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT
  6. Embedded GNSS (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS) with selectable active/passive antenna circuitry
  7. SMS Mode: Point-to-point MO and MT, SMS Cell Broadcast, Text and PDU Mode
  8. Communicate over UART or USB with AT commands and PPP connection
 
Read more

1 in stock (can be backordered)

Raspberry Pi GPRS/GPS Tracker HAT

SIXFAB

Raspberry Pi GPRS/GPS Tracker HAT

  1. Embedded GSM/GPRS and GNSS antennas, can be connect external antennas optionally
  2. Advanced power and sleep controls for battery and solar powered applications
  3. Industry’s highest level of GNSS sensitivity, accuracy and TTFF(Time to First Fix) with the lowest power consumption
  4. TTFF (Time to First Fix) ,Cold Start: <15s average, Warm Start: <5s average
  5. L96 GNSS module supports multiple positioning and navigation systems including GPS, GLONASS, Galileo, BeiDou, SBAS (including WAAS, EGNOS, MSAS and GAGAN), QZSS, DGPS, and AGPS.
  6. M95  Quad-band GPRS module supports GSM850MHz, EGSM900MHz, DCS1800MHz and PCS1900MHz
  7. L96 module features embedded logger function provides a position log capacity of more than 16 hours
  8. Easy sense 3D FIX, Geo-Fence, 1PSS status via GNSS output pin connected to Raspberry Pi
  9. CR1220 GPS/GNSS Back-up Battery holder at the bottom side of the board
  10. External Active GNSS Antenna Connector (Solder Required)
  11. Less than 100 nanoAmps consumption when the power of HAT is disabled via Disable Pin
  12. Micro SIM Card supported
  13. GNSS Module Control Pins: 1PPS, 3D Fix, Force On, Geo-Fence, Reset
  14. GPRS Module Control Pins: Status, PowerKey
  15. LEDs: 1PPS, 3D FIX, Power, Status, Netlight
  16. Buttons: Powerkey, User
  17. Easy Raspberry Pi I2C connection exposed by jumper headers
  18. HAT Features
  19. Raspberry Pi Camera ribbon cable slot
 
Read more

1 in stock

Raspberry Pi GSM/GPRS Shield

SIXFAB

Raspberry Pi GSM/GPRS Shield

  1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (3, 2, B+, A+, Zero)
  2. High Data Speed: GPRS Multi-slot class 12, 85.6kbps downlink and 85.6kbps uplink data rates
  3. Quad-band: 850/900/1800/1900MHz
  4. Built-in PCB antenna, also there is an external antenna port available
  5. Supported Protocols: TCP/ UDP/ PPP/ FTP/ HTTP/ SMTP/ CMUX/ SSL
  6. Quectel’s QuecLocator Feature, lets you get the location without GPS/GNSS
  7. Extremely low standby power consumption by M66, 1.3mA at DRX=5
  8. Efficient and low quiescent current regulator circuit can hold up to 3.6A
  9. Bluetooth Function, V3.0 specification, SPP and OPP profiles available.
  10. Micro SIM Card socket can easily reachable on the downside of the shield.
  11. Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi thanks to FTDI chip on the shield.
  12. Sending/Receiving standard V.25ter AT commands over UART port to Raspberry Pi is available
  13. Working temperature range: -30°C to +80°C
 
Read more

1 in stock

Raspberry Pi Power Management & UPS HAT

SIXFAB
Raspberry Pi Power Management & UPS HAT:
  • True Uninterruptible Power Supply(UPS) battery rechargeable solution without Failing the Raspberry Pi.
  • 3.9V to 21V Input Operating Voltage Range Supports Solar Panels.
  • 18650 Li-on Separable Battery Holder (Compatible with unprotected flat top 18650 batteries).
  • 1-cell 3.7V External Battery Input.
  • Compatible with Raspberry Pi Universal Power Supplies.
  • Onboard ARM® Cortex®-M0+ MCU manages scheduled power tasks, calendar events with Real-time Clock (RTC), graceful shutdown or wake-up, sleep mode controls.
  • Parallel Charging up to 3 Amps while powering the system.
  • Input, System and Battery current monitor.
  • Control over current limits of batteries and sources with 50mA resolution.
  • Battery protection circuit enhanced with integrated temperature sensors.
  • Thermal Shutdown and Input, System, Battery Overvoltage Protection.
  • Dynamic power management boost the system output from the battery if the needed power is more than the input supply provides.
  • Supports external GPIO interrupts to wake up or enter deep-sleep modes.
  • Only I2C pins used by the HAT.
  • Onboard STEMMA QT/Qwiic/JST SH connector.
  • Programmable user buttons and RGB LEDs.
  • Smart Cooling FAN with Pulse Signal Feedback.
  • Battery level indicator LEDs with charging/discharging status.
  • Slot  for Raspberry Pi Camera Cable.
  • Optional Pogo Spring Pins for hardware shutdown or wake up.
  • Cloud Sixfab Power Software to configure and monitor your devices remotely. (Optional)
Read more
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.