RFM210LCFW
● Comply with FCC and ETSI
● Strong anti-interference ability, suitable for complex interference environment
● Receiving Sensibility: -114dBm
● Working Frequency:315MHz, 433.92MHz
● Supply Voltage Range:1.8V-3.6V (RFM210LCF) ;4.5V-5.5V(RFM210LCF-A)
● Working Current:3.9mA
● Sleeping Current:≤1uA
● Data Rate:1-5 kbps
RFM23BPW
● Frequency Range: 433/868/915MHz ISM bands
● Sensitivity = –120 dBm
● Output power range
● +30 dBm Max (RFM23BP)
● Low Power Consumption
● 25 mA receive
● 550 mA @ +30 dBm transmit
● Data Rate = 0.123 to 256 kbps
● FSK, GFSK, and OOK modulation
● Power Supply = 3.3 to 6 V
● Ultra low power shutdown mode
● Digital RSSI
● Wake-up timer
● Auto-frequency calibration (AFC)
● Power-on-reset (POR)
● Antenna diversity and TR switch control
● Configurable packet handler
● Preamble detector
● TX and RX 64 byte FIFOs
● Low battery detector
● Temperature sensor and 8-bit ADC
● –40 to +85 °C temperature range
● Integrated voltage regulators
● Frequency hopping capability
● On-chip crystal tuning
● 16-PIN SMD package
● Low cost
RFM63W
● Low Rx power consumption: 3mA
● Low Tx power consumption: 25 mA @ +10 dBm
● Good reception sensitivity: down to -107 dBm at 25 kb/s in FSK, -113 dBm at 2kb/s in OOK
● Programmable RF output power: up to +12.5 dBm in 8 steps
● Packet handling feature with data whitening and automatic CRC generation
● Wide RSSI (Received Signal Strength Indicator) dynamic range, 70dB from Rx noise floor
● Bit rates up to 200 kb/s, NRZ coding
● On-chip frequency synthesizer
● FSK and OOK modulation
● Incoming sync word recognition
● Built-in Bit-Synchronizer for incoming data and clock synchronization and recovery
● Size:16X19.7 mm
● Optimized Circuit Configuration for Low-cost applications
RFM64W
● Low Rx power consumption: 3mA
● Low Tx power consumption: 25 mA @ +10 dBm
● Good reception sensitivity: down to -104 dBm at 25 kb/s in FSK, -110 dBm at 2kb/s in OOK
● Programmable RF output power: up to +12.5 dBm in 8 steps
● Packet handling feature with data whitening and automatic CRC generation
● RSSI (Received Signal Strength Indicator)
● Bit rates up to 150 kb/s, NRZ coding
● On-chip frequency synthesizer
● FSK and OOK modulation
● Incoming sync word recognition
● Built-in Bit-Synchronizer for incoming data and clock synchronization and recovery
● Size:16 x 19.7 mm
● Optimized Circuit Configuration for Low-cost applications
RFM75PW
● 2400-2483.5 MHz ISM band operation
● Support 250Kbps, 1Mbps and 2 Mbps air data rate
● Programmable output power(-5dBm to +20dBm)
● Tolerate +/- 60ppm 16 MHz crystal
● Variable payload length from 1 to 32bytes
● Automatic packet processing
● 6 data pipes for 1:6 star networks
● 1.9V to 3.6V power supply
● 4-pin SPI interface with maximum 8 MHz clock rate
● SMD-10pin Package
RFM75W
● 2400-2483.5 MHz ISM band operation
● Support 250Kbps, 1Mbps and 2 Mbps airdata rate
● Programmable output power
● Tolerate +/- 60ppm 16 MHz crystal
● Variable payload length from 1 to 32bytes
● Automatic packet processing
● 6 data pipes for 1:6 star networks
● 1.9V to 3.6V power supply
● 4-pin SPI interface with maximum 8 MHz clock rate
● 20-pin 4x4mm QFN package
RFM95PW
● LoRaTM Modem.
● 166dB maximum link budget.
● +30 dBm output power @433/470MHz band; +27 dBm output power @169 /868/915 MHz band.
● Programmable bit rate up to 300 kbps.
● High sensitivity: down to -136dBm.
● Low RX current of 13mA.
● FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
● Built-in bit synchronizer for clock recovery.
● Automatic RF Sense and CAD with ultra-fast AFC.
● Packet engine up to 256 bytes with CRC.
● Built-in temperature sensor and low battery indicator.
● SMD Package (35.4x18X3.85mm)
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.