Related Products
1 in stock
RAK4200:
- LoRa® module for Smart City, Smart Agriculture, Smart Industry
- Compact Form Factor: 15 x 15.5 x 2.5 mm
- 20 Pin Stamp Pad for PCB SMT mounting
- I/O ports: UART/I2C/GPIO
- Temperature range: -40°C to +85°C
- Supply voltage: 2.0 ~ 3.6V
- Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
- Low-Power Wireless Systems with 7.8kHz to 500KHz Bandwidth
- Ultra-Low Power Consumption 1.5uA in sleep mode
- Core: ARM 32-bit Cortex – M0+ with MPU
- Up to 192KB flash memory with ECC
- 20KB RAM
- 6KB of data EEPROM with ECC
1 in stock
RFM6501W:
- Ultra strong capacity of resisting disturbance, suitable for complex interference environment scenarios
- Receiving sensitivity: -137dBm SF=12、 BW=125KHz
- Working Frequency: 470MHz、868MHz、915MHz
- Supply Voltage:2.4V-3.7V
- Transmit Current: 107mA +22dbm 470MHz
- Receiver Current: 9mA 470MHz
DATASHEET
1 in stock
RAK3172:
- Based on STM32WLE5CCU6
- LoRaWAN 1.0.3 specification compliant
- Supported bands: EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923-1/2/3/4
- LoRaWAN Activation by OTAA/ABP
- LoRa Point to Point (P2P) communication
- Easy to use AT Command Set via UART interface
- Long-range - greater than 15 km with optimized antenna
- Arm Cortex-M4 32-bit
- 256 kbytes flash memory with ECC
- 64 kbytes RAM
- Ultra-Low Power Consumption of 1.69 μA in sleep mode
- Supply Voltage: 2.0 V ~ 3.6 V
- Temperature Range: -40° C ~ 85° C
Available on backorder
RFM96W:
- LoRaTM Modem.
- 168 dB maximum link budget.
- +20 dBm - 100 mW constant RF output vs. V supply.
- +14 dBm high efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- Built-in temperature sensor and low battery indicator.
- Modue Size£º16*16mm
Datasheet
LM-533PH:
- Compact size, only 12x13 mm
- Ultra-high sensitive receiving ability by LoRa® spread spectrum modulation technology
- Long-distance transmission (1KM to 10KM)
- Instant wake up over the air
- Multiple I/O available for direct sensor access : 2 UART, 1 I2C, 1 ADC
- Programmable SDK/ API
- LoRa® / FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
- Maximal output power 100mW (20dBm), output power adjustable between 5-20dBm
- Easily use, auto exchange on communication & transceiver
- Tuning free
- Accord FCC, ETSI, TELEC standard
DATASHEET
LD-50H:
- Built-in standard LoRaWAN™ FW and proprietary MOST-Link FW in the same module
- Support setting various parameters like baud rate, transmission power, transmission speed, etc
- USB interface, could be directly connected to PC or mobile devices for development and test
- Ultra-high sensitive receiving ability by LoRa® spread spectrum modulation technology
- Long-distance transmission (1KM to 10KM)
- Instant wake up over the air
- LoRa® / FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
- Maximal output power 100mW (20dBm), output power adjustable between 5-20 dBm
- Accord FCC,ETSI,TELEC standard
DATASHEET
RA-01:
- LoRaTM spread spectrum communication
- +20dBm - 10mW. Stable RF output power when input voltage changed
- Half-duplex SPI communication
- Programmable bit rate can reach to 300kbps
- Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK Modulation Mode
- 127dB RSSI wave range.
- Automatically detect RF signal, CAD mode and super high speed AFC
- With CRC 256 bytes data engine
- Half hole (castellated hole) SMD package
- With metal shielding case
- Spring Antenna
Available on backorder
RFM95W:
- LoRaTM Modem.
- 168 dB maximum link budget.
- +20 dBm - 100 mW constant RF output vs. V supply.
- +14 dBm high efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- Built-in temperature sensor and low battery indicator.
- Modue Size£º16*16mm
Datasheet
LM-110H1:
- Built-in standard LoRaWAN™ FW and proprietary M.O.S.T. FW in the same module
- Default as LoRaWAN™, switch/ pre-load M.O.S.T. by AT command
- Share same PCB/ device design for both LoRaWAN™ and private RF data communication
- For LoRaWAN™
- Standard LoRaWAN™ protocol for EU868/ US915/ AS923 and profile for local settings
- Support Class A/ Class C
- For M.O.S.T:
- MOST-Link: use AT-command set to send data over MOST-Link protocol
- M.O.S.T.: set module as different operation mode for data transmission in any format
- Frequency: 860 - 928 MHz
- Multi-channel, dual data buffer (each 256 Bytes)
- LoRa®/ FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
- Easily use, auto exchange on communication & transceiver
- PIN connector for easy development and test
- Accord FCC,ETSI, Telec standard
DATASHEET
1 in stock
RAK4270:
- LoRa module is suitable for applications in Smart City, Smart Agriculture, Smart Industry
- Compact form factor: 15 x 15.5 x 2.5 mm (LxWxH)
- 20 pin stamp pad for PCB SMT board-to-board soldering
- I/O ports: UART/I2C/GPIO
- AT commands control interface
- Temperature range: -40°C to +85°C
- Supply voltage: 2.0 to 3.6V
- Frequency Bands 433MHz(EU)/ 470-510MHz(CN)/ 865-867MHz(IN)/ 863–870MHz (EU)/ 902–928MHz(US) / 915-928MHz(AU)/ 920-923MHz(KR) / 920-923MHz(AS)
- LoRa bandwidth range of 7.8 kHz to 500 kHz, SF5 to SF12, BR=0.018~62.5 kb/s
- Ultra-low power Consumption: 1.5uA in sleep mode
- Arm Cortex-M0+ 32-bit RISC core
- 128 kbytes flash memory with ECC
- 20 kbytes RAM
- 6 kbytes of data EEPROM with ECC
- Compliance with TBC