Search
Search
CALL US ON +27 (0)11 781 2029

No products in the wishlist.

Menu

RFM69HCW

Return to Previous Page
Zoom images

Product Information

,
  • +20 dBm – 100 mW Power Output Capability
  • High Sensitivity: down to -120 dBm at 1.2 kbps
  • High Selectivity: 16-tap FIR Channel Filter
  • Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm,80 dB Blocking Immunity, no Image
  • Frequency response
  • Low current: Rx = 16 mA, 100nA register retention
  • Programmable Pout: -18 to +20 dBm in 1dB steps
  • Constant RF performance over voltage range of module
  • FSK Bit rates up to 300 kb/s
  • Fully integrated synthesizer with a resolution of 61 Hz
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Built-in Bit Synchronizer performing Clock Recovery
  • Incoming Sync Word Recognition
  • 115 dB+ Dynamic Range RSSI
  • Automatic RF Sense with ultra-fast AFC
  • Packet engine with CRC-16, AES-128, 66-byte FIFO
  • Built-in temperature sensor
  • Module Size:16X16mm
Datasheet

 

Add to Wishlist
Compare
SKU: RFM69HCW Categories: ,

Related Products

1 in stock

RFM75PW

RFM75PW ● 2400-2483.5 MHz ISM band operation ● Support 250Kbps, 1Mbps and 2 Mbps air data rate ● Programmable output power(-5dBm to +20dBm) ● Tolerate +/- 60ppm 16 MHz crystal ● Variable payload length from 1 to 32bytes ● Automatic packet processing ● 6 data pipes for 1:6 star networks ● 1.9V to 3.6V power supply ● 4-pin SPI interface with maximum 8 MHz clock rate ● SMD-10pin Package  
 

1 in stock

HM-TRPW

HM-TRPW ● Low cost, high performance , high reliability ● FSK modulation, 2-way half –duplex communication, strong anti-interfere ● 434/470/869/915MHz ISM band，globally license free. ● Maximal output power100mW(20dBm)，output power adjustable between 1-20dBm ● Sensitivity -117dBm ● Supply current for Tx 100mA@20dBm, 40mA@14dBm ● Supply current for Rx 25mA ● Low current sleep mode 1uA ● Standard TTL UART interface, extendable to RS232 or other interface ● Operation frequency can be configured, acceptable for several modules working in different frequency    with no disturbance on each other. ● Optional for frequency deviation and receiving ISM bandwidth, users can be modulated by software. ● Easily use, auto exchange on communication & transceiver ● Communication speed 1.2kbps -115.2kbps，can be modulated through software ● Afford ENABLE control signal，user self control work duty cycle ● RSSI function ● With LED indication ● Longer transmission distance，over 1Km in open air ● Small size 16X20X2MM，9 PIN DIP & 9 PIN SMD package，easy for assembly . ● Tuning free ● Accord FCC,ETSI standard  
 

1 in stock

RFM63W

RFM63W ● Low Rx power consumption: 3mA ● Low Tx power consumption: 25 mA @ +10 dBm ● Good reception sensitivity: down to -107 dBm at 25 kb/s in FSK, -113 dBm at 2kb/s in OOK ● Programmable RF output power: up to +12.5 dBm in 8 steps ● Packet handling feature with data whitening and automatic CRC generation ● Wide RSSI (Received Signal Strength Indicator) dynamic range, 70dB from Rx noise floor ● Bit rates up to 200 kb/s, NRZ coding ● On-chip frequency synthesizer ● FSK and OOK modulation ● Incoming sync word recognition ● Built-in  Bit-Synchronizer  for  incoming  data  and clock synchronization and recovery ● Size：16X19.7 mm ● Optimized Circuit Configuration for Low-cost applications  
 

Available on backorder

RFM69CW

  • +13 dBm Power Output Capability
  • High Sensitivity: down to -120 dBm at 1.2 kbps
  • High Selectivity: 16-tap FIR Channel Filter
  • Bullet-proof front end:    IIP3 = -18 dBm,    IIP2 = +35 dBm,80 dB Blocking Immunity, no Image Frequency response
  • Low current: Rx = 16 mA, 100nA register retention
  • Programmable Pout: -18 to +13 dBm in 1dB steps
  • Constant RF performance over voltage range of module
  • FSK Bit rates up to 300 kb/s
  • Fully integrated synthesizer with a resolution of 61 Hz
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Built-in Bit Synchronizer performing Clock Recovery
  • Incoming Sync Word Recognition
  • 115 dB+ Dynamic Range RSSI
  • Automatic RF Sense with ultra-fast AFC
  • Packet engine with CRC-16, AES-128, 66-byte FIFO
  • Built-in temperature sensor
  • Module Size:16X16mm
Datasheet
 

1 in stock

NF01

NF01:
  • DIP-8 ultra-small package
  • Built-in 2.4G antenna, compact size, easy to use
  • Supports six channels of data reception
  • Supports general modulation methods such as GFSK/FSK
  • Supports 2Mbps/1Mbps/250Kbps data rate
  • Multi-frequency point: 126 frequency points to meet the needs of multi-point communication and frequency hopping communication
  • Internally integrated high PSRR LDO
  • Wide supply voltage range: 1.9~3.6V
  • Receive sensitivity: -96dBm@250kbps
  • Maximum transmit power: 7dBm
  • 4-wire SPI interface with speeds up to 10MHz
  • Support 1bit RSSI output
 

1 in stock

NF04

NF04:
  • DIP-8 ultra-small package, built-in 2.4G antenna, small size, easy to use
  • Supports data reception for six channels
  • Supports common modulation such as GFSK / FSK
  • Supports 2Mbps / 1Mbps / 250Kbps data rate
  • Multi-frequency: 126 frequency, to meet the needs of multi-point communication and frequency hopping communication
  • Internal integration of high PSRR LDOs
  • Wide supply voltage range: 1.9 ~ 3.6V
  • Average emission current as low as 110mA
 

1 in stock

RFM50W

RFM50W:
  • Ultra Low Power: 0.9 to 3.6 V Operation
  • Typical sleep mode current
  • Two built-in brown-out detectors cover sleep and active modes
  • 10-Bit Analog to Digital Converter
  • Dual Comparators
  • Programmable hysteresis and response time
  • Low current (< 0.5 μA)
  • On-Chip Debug
  • Complete development kit
  • High-Speed 8051 μC Core
  • Expanded interrupt handler
  • Memory: 4352 bytes internal data RAM (256 + 4096)
  • Frequency range = 433,470,868,915 MHz ISM Band
  • Sensitivity = –121 dBm
  • FSK, GFSK, and OOK modulation
  • Max output power = +20 dBm
  • RF power consumption
  • Data rate = 0.123 to 256 kbps
  • Auto-frequency calibration (AFC)
  • Transmit/receive switch control
  • Programmable packet handler
  • TX and RX 64 byte FIFOs
  • Frequency hopping capability
  • On-chip crystal tuning
  • Low power 32-bit SmaRTClock
  • Package: 30-pin SMD (11x25X2.0 mm)
 

1 in stock

HM-TRLR-SW

HM-TRLR-SW ● Low cost, high performance , high reliability ● LoRa/FSK/GFSK/OOK modulation, 2-way half –duplex communication, strong anti-interfere ● 433/470/868/915MHz ISM band，globally license free. ● Maximal output power100mW(20dBm)，output power adjustable between 2-20dBm ● LORA Sensitivity -139dBm ● Supply current for Tx 130mA@20dBm, 35mA@13dBm ● Supply current for Rx 16mA ● Low current sleep mode 2uA ● Standard UART interface, extendable to RS232 or other interface ● Operation frequency can be configured, acceptable for several modules working in different frequency with no disturbance on each other. ● RF parameters as needed, users can be modulated by software. ● Easily use, auto exchange on communication & transceiver ● Communication speed 1.2kbps -115.2kbps，can be modulated through software ● Afford Sleep control signal，user self control work duty cycle ● With LED indication ● Longer transmission distance，over 5Km in open air ● Small size 16*20*2mm， 10PIN SMD package，easy for assembly . ● Tuning free ● Accord FCC,ETSI standard  
 

1 in stock

RFM75W

RFM75W ● 2400-2483.5 MHz ISM band operation ● Support 250Kbps, 1Mbps and 2 Mbps airdata rate ● Programmable output power ● Tolerate +/- 60ppm 16 MHz crystal ● Variable payload length from 1 to 32bytes ● Automatic packet processing ● 6 data pipes for 1:6 star networks ● 1.9V to 3.6V power supply ● 4-pin SPI interface with maximum 8 MHz clock rate ● 20-pin 4x4mm QFN package  
 

Available on backorder

HM-TRLR-S/HTRP

  • Low cost, high performance, high reliability
  • LoRa/FSK/GFSK/OOK modulation, 2-way half –duplex communication, strong anti-interfere
  • 433/915MHz ISM band, globally license free.
  • Maximal output power100mW(20dBm)， output power adjustable between 2-20dBm
  • LORA Sensitivity -139dBm
  • Supply current for Tx 130mA@20dBm, 35mA@13dBm
  • Supply current for Rx 16mA
  • Low current sleep mode 2uA
  • Standard UART interface, extendable to RS232 or other interface
  • Operation frequency can be configured, acceptable for several modules working in different frequency with no disturbance on each other.
  • RF parameters as needed, users can be modulated by software.
  • Easily use, auto exchange on communication & transceiver
  • Communication speed 1.2kbps -115.2kbps，can be modulated through software
  • Afford Sleep control signal，user self control work duty cycle
  • With LED indicator
  • Longer transmission distance，over 5Km in open air
  • Small size 16*20*2mm，10PIN SMD package，easy for assembly .
  • Tuning free
  • Accord FCC, ETSI standard
Datasheet
 
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.