RAK4200
Return to Previous PageProduct Information
RAK4200:
- LoRa® module for Smart City, Smart Agriculture, Smart Industry
- Compact Form Factor: 15 x 15.5 x 2.5 mm
- 20 Pin Stamp Pad for PCB SMT mounting
- I/O ports: UART/I2C/GPIO
- Temperature range: -40°C to +85°C
- Supply voltage: 2.0 ~ 3.6V
- Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
- Low-Power Wireless Systems with 7.8kHz to 500KHz Bandwidth
- Ultra-Low Power Consumption 1.5uA in sleep mode
- Core: ARM 32-bit Cortex – M0+ with MPU
- Up to 192KB flash memory with ECC
- 20KB RAM
- 6KB of data EEPROM with ECC
Category: LORA MODULES
Share Social
Related Products
LM-130H
LM-130H:
DATASHEET
- Built-in standard LoRaWAN™ FW and proprietary M.O.S.T. FW in same module
- Default as LoRaWAN™, switch/ pre-load M.O.S.T. by external HW design
- Share same PCB/ device design for both LoRaWAN™ and private RF data communication
- For LoRaWAN™
- Pin-to-pin compatible with LM-130H
- Standard LoRaWAN™ protocol for EU868/ US915/ AS923 and profile for local settings
- For M.O.S.T:
- MOST-Link: use AT-command set to send data over MOST-Link protocol
- M.O.S.T.: set module as different operation mode for data transmission in any format
- Frequency: 860 - 928MHz
- Ultra-high sensitive receiving ability by LoRa® spread spectrum modulation technology
- Accord FCC, ETSI, Telec standard
DATASHEET
1 in stock
RFM6501W
RFM6501W:
- Ultra strong capacity of resisting disturbance, suitable for complex interference environment scenarios
- Receiving sensitivity: -137dBm SF=12、 BW=125KHz
- Working Frequency: 470MHz、868MHz、915MHz
- Supply Voltage:2.4V-3.7V
- Transmit Current: 107mA +22dbm 470MHz
- Receiver Current: 9mA 470MHz
DATASHEET
1 in stock
RFM90W
RFM90W
- LoRaTM Modem.
- +22dBm RF output .
- Programmable bit rate up to 300kbps(FSK)/62.5K(LORA).
- High sensitivity: down to -137dBm@LoRa BW 125KHz ; SF12. -118dBm @FSK, 4.8kbps.
- Excellent blocking immunity.
- Low RX current of 8mA, 600 nA register retention.
- Fully integrated synthesizer with step 0.95 Hz.
- (G)FSK, (G)MSK, LoRaTM modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127dB Dynamic Range instantaneous/Packet RSSI.
- Automatic CAD .
- Module Size：16*16mm
1 in stock
RFM95PW
RFM95PW
● LoRaTM Modem.
● 166dB maximum link budget.
● +30 dBm output power @433/470MHz band; +27 dBm output power @169 /868/915 MHz band.
● Programmable bit rate up to 300 kbps.
● High sensitivity: down to -136dBm.
● Low RX current of 13mA.
● FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
● Built-in bit synchronizer for clock recovery.
● Automatic RF Sense and CAD with ultra-fast AFC.
● Packet engine up to 256 bytes with CRC.
● Built-in temperature sensor and low battery indicator.
● SMD Package (35.4x18X3.85mm)
Out of stock
RA-02
RA-02:
DATASHEET
- LoRaTM spread spectrum communication
- +20dBm - 10mW. Stable RF output power when input voltage changed
- Half-duplex SPI communication
- Programmable bit rate can reach to 300kbps
- Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK Modulation Mode
- 127dB RSSI wave range.
- Automatically detect RF signal, CAD mode and super high speed AFC
- With CRC 256 bytes data engine
- Half hole (castellated hole) SMD package
- With metal shielding case
DATASHEET
1 in stock
RAK3172
RAK3172:
- Based on STM32WLE5CCU6
- LoRaWAN 1.0.3 specification compliant
- Supported bands: EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923-1/2/3/4
- LoRaWAN Activation by OTAA/ABP
- LoRa Point to Point (P2P) communication
- Easy to use AT Command Set via UART interface
- Long-range - greater than 15 km with optimized antenna
- Arm Cortex-M4 32-bit
- 256 kbytes flash memory with ECC
- 64 kbytes RAM
- Ultra-Low Power Consumption of 1.69 μA in sleep mode
- Supply Voltage: 2.0 V ~ 3.6 V
- Temperature Range: -40° C ~ 85° C
1 in stock
RAK4260
RAK4260
- High-quality Low power LoRa® device (Microchip ATSAMR34J18 SiP)
- Fully supported 862 to 1020 MHz frequency coverage (all LoRaWAN® bands)
- High level of accuracy and stability (32MHz TXCO)
- Max Tx Power: 20dBm
- Max Sensitivity (SF12 BW125kHz): -136dBm
- Rx Current: 17mA (typical)
- A rich selection of interfaces: I2C, SPI, ADC, UART, GPIOs
- Module Size: 15mm x 15mm x 2.0mm
1 in stock
RAK4600 LoRa® Module
RAK4600 LoRa® Module:
- LoRa® module for Smart City, Smart Agriculture, Smart Industry
- Compact Form Factor: 15 x 23 x 2.5 mm
- 42 Pin Stamp Pad for PCB SMT mounting
- I/O ports: UART/I2C/GPIO (optional NFC interface)
- Temperature range: -40°C to +85°C
- Supply voltage: 2.0 ~ 3.6V
- Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
- Low-Power Wireless Systems with 7.8kHz to 500KHz Bandwidth
- Ultra-Low Power Consumption 2.0uA in Sleep mode
- LoRa® Boost mode with 20dBm output power
- BLE 5.0 (Tx power -20 to +4 dBm in 4dB steps)
LM-553PH
LM-533PH:
DATASHEET
- Compact size, only 12x13 mm
- Ultra-high sensitive receiving ability by LoRa® spread spectrum modulation technology
- Long-distance transmission (1KM to 10KM)
- Instant wake up over the air
- Multiple I/O available for direct sensor access : 2 UART, 1 I2C, 1 ADC
- Programmable SDK/ API
- LoRa® / FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
- Maximal output power 100mW (20dBm), output power adjustable between 5-20dBm
- Easily use, auto exchange on communication & transceiver
- Tuning free
- Accord FCC, ETSI, TELEC standard
DATASHEET
1 in stock
RFM99W
RFM99W
- Super strong capacity of resisting disturbance, which suitable for complex interference environment scenarios
- RXSensitivity: -132dBm 1 Kbps 2.4GHz
- Working Frequency: 2400MHZ-2500MHz
- Working Voltage: 1.8V-3.7V
- TX Current: 30mA +12.5dbm 2.4GHz
- RX Current: 8.5mA 2.4GHz
- Sleeping Current: ≤1uA
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.