Search
Search
CALL US ON +27 (0)11 781 2029

No products in the wishlist.

Menu

LM-110H1

Return to Previous Page
LM-110H
Zoom images

Product Information

LM-110H1:

  • Built-in standard LoRaWAN™ FW and proprietary M.O.S.T. FW in the same module
  • Default as LoRaWAN™, switch/ pre-load M.O.S.T. by AT command
  • Share same PCB/ device design for both LoRaWAN™ and private RF data communication
  • For LoRaWAN™
    • Standard LoRaWAN™ protocol for EU868/ US915/ AS923 and profile for local settings
    • Support Class A/ Class C
  • For M.O.S.T:
    • MOST-Link: use AT-command set to send data over MOST-Link protocol
    • M.O.S.T.: set module as different operation mode for data transmission in any format
    • Frequency: 860 – 928 MHz
    • Multi-channel, dual data buffer (each 256 Bytes)
  • LoRa®/ FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
  • Easily use, auto exchange on communication & transceiver
  • PIN connector for easy development and test
  • Accord FCC,ETSI, Telec standard
DATASHEET

Add to Wishlist
Compare
Category:

Related Products

LM-533

LM-553PH

LM-533PH:
  • Compact size, only 12x13 mm
  • Ultra-high sensitive receiving ability by LoRa® spread spectrum modulation technology
  • Long-distance transmission (1KM to 10KM)
  • Instant wake up over the air
  • Multiple I/O available for direct sensor access : 2 UART, 1 I2C, 1 ADC
  • Programmable SDK/ API
  • LoRa® / FSK/ GFSK/ OOK modulation, 2-way half –duplex communication, strong anti-interfere
  • Maximal output power 100mW (20dBm), output power adjustable between 5-20dBm
  • Easily use, auto exchange on communication & transceiver
  • Tuning free
  • Accord FCC, ETSI, TELEC standard
DATASHEET

1 in stock

RAK3172

RAK3172:
  • Based on STM32WLE5CCU6
  • LoRaWAN 1.0.3 specification compliant
  • Supported bands: EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923-1/2/3/4
  • LoRaWAN Activation by OTAA/ABP
  • LoRa Point to Point (P2P) communication
  • Easy to use AT Command Set via UART interface
  • Long-range - greater than 15 km with optimized antenna
  • Arm Cortex-M4 32-bit
  • 256 kbytes flash memory with ECC
  • 64 kbytes RAM
  • Ultra-Low Power Consumption of 1.69 μA in sleep mode
  • Supply Voltage: 2.0 V ~ 3.6 V
  • Temperature Range: -40° C ~ 85° C
 

1 in stock

RFM90W

RFM90W
  • LoRaTM Modem.
  • +22dBm RF output .
  • Programmable bit rate up to 300kbps(FSK)/62.5K(LORA).
  • High sensitivity: down to -137dBm@LoRa BW 125KHz ; SF12. -118dBm @FSK, 4.8kbps.
  • Excellent blocking immunity.
  • Low RX current of 8mA, 600 nA register retention.
  • Fully integrated synthesizer with step 0.95 Hz.
  • (G)FSK, (G)MSK, LoRaTM modulation.
  • Built-in bit synchronizer for clock recovery.
  • Preamble detection.
  • 127dB Dynamic Range instantaneous/Packet RSSI.
  • Automatic CAD .
  • Module Size：16*16mm
 

1 in stock

RAK4270

RAK4270:
  • LoRa module is suitable for applications in Smart City, Smart Agriculture, Smart Industry
  • Compact form factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • 20 pin stamp pad for PCB SMT board-to-board soldering
  • I/O ports: UART/I2C/GPIO
  • AT commands control interface
  • Temperature range: -40°C to +85°C
  • Supply voltage: 2.0 to 3.6V
  • Frequency Bands 433MHz(EU)/ 470-510MHz(CN)/ 865-867MHz(IN)/ 863–870MHz (EU)/ 902–928MHz(US) / 915-928MHz(AU)/ 920-923MHz(KR) / 920-923MHz(AS)
  • LoRa bandwidth range of 7.8 kHz to 500 kHz, SF5 to SF12, BR=0.018~62.5 kb/s
  • Ultra-low power Consumption: 1.5uA in sleep mode
  • Arm Cortex-M0+ 32-bit RISC core
  • 128 kbytes flash memory with ECC
  • 20 kbytes RAM
  • 6 kbytes of data EEPROM with ECC
  • Compliance with TBC
 

1 in stock

RAK4200

RAK4200:
  • LoRa® module for Smart City, Smart Agriculture, Smart Industry
  • Compact Form Factor: 15 x 15.5 x 2.5 mm
  • 20 Pin Stamp Pad for PCB SMT mounting
  • I/O ports: UART/I2C/GPIO
  • Temperature range: -40°C to +85°C
  • Supply voltage: 2.0 ~ 3.6V
  • Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
  • Low-Power Wireless Systems with 7.8kHz to 500KHz Bandwidth
  • Ultra-Low Power Consumption 1.5uA in sleep mode
  • Core: ARM 32-bit Cortex – M0+ with MPU
  • Up to 192KB flash memory with ECC
  • 20KB RAM
  • 6KB of data EEPROM with ECC
 

Available on backorder

RFM95

RFM95W

RFM95W:
  • LoRaTM Modem.
  • 168 dB maximum link budget.
  • +20 dBm - 100 mW constant RF output vs. V supply.
  • +14 dBm high efficiency PA.
  • Programmable bit rate up to 300 kbps.
  • High sensitivity: down to -148 dBm.
  • Bullet-proof front end: IIP3 = -12.5 dBm.
  • Excellent blocking immunity.
  • Low RX current of 10.3 mA, 200 nA register retention.
  • Fully integrated synthesizer with a resolution of 61 Hz.
  • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  • Built-in bit synchronizer for clock recovery.
  • Preamble detection.
  • 127 dB Dynamic Range RSSI.
  • Automatic RF Sense and CAD with ultra-fast AFC.
  • Packet engine up to 256 bytes with CRC.
  • Built-in temperature sensor and low battery indicator.
  • Modue Size£º16*16mm
Datasheet
 

1 in stock

RAK811

RAK811:
  • Based on Semtech SX1276
  • Full LoRaWAN 1.0.2 stack support
  • Supported bands: EU433, CN470, IN865, EU868, AU915, US915, KR920, AS920, and AS923
  • Output power: 5 to 20dBm adjustable
  • Max sensitivity: -130dBm@0.3kps
  • Open source firmware with built-in AT command functionality for easy setup
  • Theoretical max range of 2km in Urban and 15km in open areas
  • Integrates both SMA and iPEX antenna connectors
  • Operating temperature: -40°C ~ 85°C (industrial grade)
  • Storage temperature: -40°C ~ 85°C (non-condensing)
 

Available on backorder

RFM96W

RFM96W/RFM98W

RFM96W:
  • LoRaTM Modem.
  • 168 dB maximum link budget.
  • +20 dBm - 100 mW constant RF output vs. V supply.
  • +14 dBm high efficiency PA.
  • Programmable bit rate up to 300 kbps.
  • High sensitivity: down to -148 dBm.
  • Bullet-proof front end: IIP3 = -12.5 dBm.
  • Excellent blocking immunity.
  • Low RX current of 10.3 mA, 200 nA register retention.
  • Fully integrated synthesizer with a resolution of 61 Hz.
  • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  • Built-in bit synchronizer for clock recovery.
  • Preamble detection.
  • 127 dB Dynamic Range RSSI.
  • Automatic RF Sense and CAD with ultra-fast AFC.
  • Packet engine up to 256 bytes with CRC.
  • Built-in temperature sensor and low battery indicator.
  • Modue Size£º16*16mm
Datasheet
 

Out of stock

RA-02

RA-02:
  • LoRaTM spread spectrum communication
  • +20dBm - 10mW. Stable RF output power when input voltage changed
  • Half-duplex SPI communication
  • Programmable bit rate can reach to 300kbps
  • Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK Modulation Mode
  • 127dB RSSI wave range.
  • Automatically detect RF signal, CAD mode and super high speed AFC
  • With CRC 256 bytes data engine
  • Half hole (castellated hole) SMD package
  • With metal shielding case
DATASHEET

1 in stock

RAK4600 LoRa® Module

RAK4600 LoRa® Module:

  • LoRa® module for Smart City, Smart Agriculture, Smart Industry
  • Compact Form Factor: 15 x 23 x 2.5 mm
  • 42 Pin Stamp Pad for PCB SMT mounting
  • I/O ports: UART/I2C/GPIO (optional NFC interface)
  • Temperature range: -40°C to +85°C
  • Supply voltage: 2.0 ~ 3.6V
  • Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
  • Low-Power Wireless Systems with 7.8kHz to 500KHz Bandwidth
  • Ultra-Low Power Consumption 2.0uA in Sleep mode
  • LoRa® Boost mode with 20dBm output power
  • BLE 5.0 (Tx power -20 to +4 dBm in 4dB steps)
 
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.