ESP Rainmaker
Return to Previous PageProduct Information
ESP Rainmaker:
ESP RainMaker is an end-to-end platform that enables Makers to realize their IoT ideas faster with Espressif’s ESP32-S2 SoC without hassle of managing any infrastructure. It provides a device SDK, self-adapting phone apps, transparent cloud service and host utilities to reduce complexity in development.
Category: WIFI CHIPSET
Share Social
Related Products
1 in stock
ESP32-S0WD
ESP32-S0WD
DATASHEET
- BLuetooth 5
- Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET
1 in stock
ESP32-S2
ESP32-S2:
- Xtensa® single-core 32-bit LX7 microcontroller
- 7-stage pipeline
- Clock frequency up to 240 MHz
- Ultra-low-power co-processor
- 320 kB SRAM, 128 kB ROM, 16 KB RTC memory
- External SPIRAM (128 MB total) support
- Up to 1 GB of external flash support
- Separate instruction and data cache
- Wi-Fi 802.11 b/g/n
- 1x1 transmit and receive
- HT40 support with data rate up to 150 Mbps
- Support for TCP/IP networking, ESP-MESH networking, TLS 1.0, 1.1 and 1.2 and other networking protocols over Wi-Fi
- Support Time-of-Flight (TOF) measurements with normal Wi-Fi packets
- 43 programmable GPIO’s
- 14 capacitive touch sensing IO’s
- Standard peripherals including SPI, I2C, I2S, UART, ADC/DAC and PWM
- LCD (8-bit parallel RGB/8080/6800) interface and also support for 16/24-bit parallel
- Camera interface supports 8 or 16-bit DVP image sensor, with clock frequency of up to 40 MHz
- Full speed USB OTG support
ESP32-PICO-D4
ESP32-PICO-D4
DATASHEET
- The Espressif ESP32-PICO-D4 is a System-in-Package (SIP) module that is based on ESP32, providing complete Wi-Fiand Bluetooth functionalities
- Module has a size as small as 7.0±0.1 mm×7.0±0.1 mm×0.94±0.1 mm
- ESP32-PICO-D4 integrates all peripheral components seamlessly, including a crystal oscillator, flash, filter capacitors and RF matching links in one single package.
- On-Chip Sensors: Hall Sensor and Temperature Sensor
- Module Interface: ADC, LNA pre-amplifier, DAC, touch sensor, SD/SDIO/MMC,Host Controller, SPI, SDIO/SPI Slave Controller, EMAC, motor,PWM, LED PWM, UART, I2C, I2S, infrared remote controller,GPIO.
- Operating Current: 80mA
- Operating Voltage: 2.3 to 3.6 V
DATASHEET
1 in stock
1 in stock
ESP32-D0WD-V3
ESP32-DoWD-D3:
Datasheet
- Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
Datasheet
1 in stock
ESP32-D0WDQ6
ESP32-D0WDQ6
DATASHEET
- Dual CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET
1 in stock
Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.