Search
Search
CALL US ON +27 (0)11 781 2029

No products in the wishlist.

Menu

WIFI CHIPSET

Return to Previous Page
Filters
Show
Per page

1 in stock

ESP Rainmaker

ESP Rainmaker: ESP RainMaker is an end-to-end platform that enables Makers to realize their IoT ideas faster with Espressif’s ESP32-S2 SoC without hassle of managing any infrastructure. It provides a device SDK, self-adapting phone apps, transparent cloud service and host utilities to reduce complexity in development.    

1 in stock

ESP32-C3

ESP32-C3:
  • A complete Wi-Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
  • A Bluetooth LE subsystem that supports features of Bluetooth 5 and Bluetooth mesh
  • State-of-the-art power and RF performance 32-bit RISC-V single-core processor with a four-stage pipeline that operates at up to 160 MHz
  • 400 KB of SRAM (16 KB for cache) and 384 KB of ROM on the chip, and SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to external flash
  • 22 × programmable GPIOs
  • 2 × 12-bit SAR ADCs, up to 6 channels
  • 1 × temperature sensor
  • 3 × SPI
  • 2 × UART
  • 1 × I2C
  • 1 × I2S
  • Remote control peripheral, with 2 transmit channels and 2 receive channels
  • LED PWM controller, up to 6 channels General DMA controller, with 3 transmit channels and 3 receive channels
  • 1 × TWAITM controller (compatible with ISO 11898-1)
 

1 in stock

ESP32-D0WD-V3

ESP32-DoWD-D3:
  • Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
  • +19.5 dBm output power ensures a good physical range
  • Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
  • Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
  • Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
  • Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
  • Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
 
Datasheet

1 in stock

ESP32-D0WDQ6

ESP32-D0WDQ6
  • Dual CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
  • +19.5 dBm output power ensures a good physical range
  • Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
  • Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
  • Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
  • Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
  • Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET    

ESP32-PICO-D4

ESP32-PICO-D4
  • The Espressif ESP32-PICO-D4 is a System-in-Package (SIP) module that is based on ESP32, providing complete Wi-Fiand Bluetooth functionalities
  • Module has a size as small as 7.0±0.1 mm×7.0±0.1 mm×0.94±0.1 mm
  • ESP32-PICO-D4 integrates all peripheral components seamlessly, including a crystal oscillator, flash, filter capacitors and RF matching links in one single package.
  • On-Chip Sensors: Hall Sensor and Temperature Sensor
  • Module Interface: ADC, LNA pre-amplifier, DAC, touch sensor, SD/SDIO/MMC,Host Controller, SPI, SDIO/SPI Slave Controller, EMAC, motor,PWM, LED PWM, UART, I2C, I2S, infrared remote controller,GPIO.
  • Operating Current: 80mA
  • Operating Voltage: 2.3 to 3.6 V
DATASHEET  

1 in stock

ESP32-S0WD

ESP32-S0WD
  • BLuetooth 5
  • Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
  • +19.5 dBm output power ensures a good physical range
  • Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
  • Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
  • Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
  • Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
  • Peripherals include capacitive touch sensors, Hall sensor, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
DATASHEET

1 in stock

ESP32-S2

ESP32-S2:
  • Xtensa® single-core 32-bit LX7 microcontroller
  • 7-stage pipeline
  • Clock frequency up to 240 MHz
  • Ultra-low-power co-processor
  • 320 kB SRAM, 128 kB ROM, 16 KB RTC memory
  • External SPIRAM (128 MB total) support
  • Up to 1 GB of external flash support
  • Separate instruction and data cache
  • Wi-Fi 802.11 b/g/n
  • 1x1 transmit and receive
  • HT40 support with data rate up to 150 Mbps
  • Support for TCP/IP networking, ESP-MESH networking, TLS 1.0, 1.1 and 1.2 and other networking protocols over Wi-Fi
  • Support Time-of-Flight (TOF) measurements with normal Wi-Fi packets
  • 43 programmable GPIO’s
  • 14 capacitive touch sensing IO’s
  • Standard peripherals including SPI, I2C, I2S, UART, ADC/DAC and PWM
  • LCD (8-bit parallel RGB/8080/6800) interface and also support for 16/24-bit parallel
  • Camera interface supports 8 or 16-bit DVP image sensor, with clock frequency of up to 40 MHz
  • Full speed USB OTG support
 

1 in stock

ESP32-S3

ESP32-S3:
  • Wi-Fi + Bluetooth LE 5.0 Wireless Connectivity
  • AI Acceleration Support
  • Rich Set of IO Peripherals
  • Security
  • Mature Software Support
  • 512 KB of internal SRAM
  • Bluetooth-Low-Energy 5.0
  • 44 programmable GPIOs
 

1 in stock

ESP8266EX

ESP8266EX
  • High-performance 160 MHz single-core CPU
  • +19.5 dBm output power ensures a good physical range
  • Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
  • Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
DATASHEET

1 in stock

ESP8285

ESP8285
  • High-performance 160 MHz single-core CPU
  • +19.5 dBm output power ensures a good physical range
  • Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
  • Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
DATASHEET

1 in stock

ESP8684

ESP8684:
  • A complete Wi­Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
  • A Bluetooth LE subsystem that supports features of Bluetooth 5, multiple connections and advertising extensions.
  • State­ of ­the­art power and RF performance
  • 32­bit RISC­V single­core processor with a four-stage pipeline that operates at up to 120 MHz
  • Storage capacity ensured by 272 KB of SRAM (16 KB for cache) and 576 KB of ROM on the chip
  • Rich set of peripheral interfaces and GPIOs, ideal for various scenarios and complex applications
 

Showing all 11 results

Created by Aviel Media - Creativity. Innovation. Excellence.
Copyright © 2016 iCorp Group. All Rights Reserved.